You have no items in your shopping cart.
Designed for systems up to 4kW, our easy to use kit builder follows six simple steps: PANEL, ARRAY, INVERTER, WIND LOAD, MOUNTING KIT and EXTRAS. You can move backwards and forwards through each section changing product selections or quantities; if you want to start again simply refresh your browser to reset the kit builder. You can keep track of your total spend as each product is selected and add all items to your shopping cart to complete your order. What are you waiting for? Start Building!
Use the filters to select your preferred PV panel.
Use the PV array design tool along with the design parameters to create your specification:
The list below displays all the inverter options which are compatible with your current PV array design. Use the filters to find the ideal inverter solution for your PV kit.
Sea or coastal area exposed to the open sea
Lakes or flat and horizontal area with negligible vegetation and without obstacles
Area with low vegetation such as grass and isolated obstacles (trees, buildings) with separations of at least 20 obstacle heights
Area with regular cover of vegetation or buildings or with isolated obstacles with separations of maximum 20 obstacle heights (such as villages, suburban terrain, permanent forest)
Area in which at least 15 % of the surface is covered with buildings and their average height exceeds 15 m
The parts list below contains all the essential items required to build a small domestic solar PV kit. Once you have selected the roof type of your PV installation, all applicable mounting components can be selected from the filters and all quantities will be calculated automatically based on the specification of your array.
Firstly, please select the type of roof you are fitting the solar PV array to.
|Rail Cross Connectors||
|Rail End Caps||
The list below gives all the applicable EnPhase components required for your PV kit based on your design specifications. All quantities have been calculated automatically but please adjust any quantities to tailor your EnPhase components as required
|Envoy Communications Gateway||
|Engage 1m Cable||
|Engage 1.7m Cable||
|Cable Branch Terminators||
|Cable Sealing Caps||
|Cable Disconnect Tool||
The SolarEdge inverter you have selected requires a DC/DC power optimiser for each PV module in the array. Please select from the list of available optimisers for your PV kit and choose a connection kit for fixing optimisers to your chosen mounting profile.
Mounting - Micro Inverters
Choose how to affix micro inverters to your chosen mounting profile.
AC & DC Isolators
Please select your AC and DC (where applicable) isolation requirements. The kit builder recommends the quantity and type of isolator best suited to the electrical configuration of your PV kit but PLEASE CHECK the items specified are compatible with your system design.
Cables & Connectors
The cable and MC4 cable connection requirements are calculated based on the optimal string design for your chosen inverter. Please adjust the quanities to suit your installation needs.
|Male MC4 Connectors||
|Female MC4 Connectors||
Labels & Meters
Please select an energy meter (if required) for your solar PV kit. In this section you can add solar installation labels to complete the requirements of your system design
|Summary : PV Panels|
|Summary : Inverter|
The following list of items are non-essential but could help reduce installation time, maximise the efficiency of a PV system or provide solar PV generation information for the end-user.
To offer the end-user a PV monitoring system, select either a brand specific or universal monitor from the list.
Voltage optimisation units intelligently monitor all parameters relating to a domestic electrical system and deliver optimum performance. For more information Click Here
SolarFlash is designed to create a waterproof solution for refitting slates/tiles around a solar PV roof hook or bracket. For more information Click Here
As per section 6 of the Waxman Energy Ltd Terms & Conditions of Sales, all designs, specifications, drawings and materials, while remaining property of Waxman Energy Ltd, are provided for reference only and are intended solely as guidance. No liability will be accepted for any defect in designs, specifications or associated materials, whether caused by negligence or otherwise. MCS operates, essentially, as a Competent Person Scheme for the renewable energy industry, providing quality and consistency to protect consumers, installers and manufacturers. As such, installers have a responsibility to carefully check all installation considerations, restrictions and calculations prior to purchasing and/or fixing a solar PV system.